Filter
Top Products
62
Setup menu list (continued)
Item
Display
mode
Description of settings
CARD READ
(Camera)
Loads the metadata recorded on the SD Memory Card on to the unit.
SLOT1, SLOT2, NO
“NO FILE’ is displayed when no metadata is recorded on the SD Memory Card.•
RECORD
(Camera)
Sets whether to record the metadata to be loaded on the unit simultaneously on
a SD Memory Card.
ON: Records simultaneously
OFF: Does not record simultaneously
USER CLIP
NAME
(Camera)
Selects the method of recording the USER CLIP NAME.
TYPE1: The user clip name is the same as the CLIP NAME if no uploaded
metadata or data exists.
TYPE2: The user clip name is the same as the CLIP NAME if no combination of
data and COUNT value is uploaded, or if no uploaded data exists.
META DATA
PROP
(Camera)
Displays the metadata recorded in the unit.
YES, NO
CLIP
COUNTER RST
(Camera)
Resets the COUNT value to 1.
YES, NO
META INT SET
(Camera)
Initializes the metadata recorded in the unit.
All settings, including the ON or OFF setting for RECORD are now cleared.
YES, NO
OTHER FUNCTIONS screen
Item
Display
mode
Description of settings
LENS CHECK
(Camera)
ON: Checks the communication status with the lens. Video shooting is not
performed if checking is not proper.
OFF: Does not check the communication status with the lens.
It is recommended to set LENS CHECK to ON when you are using lenses •
conforming to the Micro Four Thirds and Four Thirds standard.
When you are using a lens that has no communication connection between the •
camera and lens through the use of a mount adaptor, video shooting is enabled
when you set this item to OFF.
IR REMOTE
(Camera)
(PB)
Sets the operations of the supplied remote control unit.
ON: Accepts commands from the remote control.
•Notethatifthesametypeofremotecontrolisusednearthe
unit, the unit may receive commands from the other remote
control, during shooting for example, and suddenly operate in an
unexpected manner.
OFF: Does not accept commands from the remote control.
TALLY LAMP
(Camera)
Sets lighting of the tally lamp.
FRONT: The front tally lamp (microphone side) lights.
REAR: The rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF: No tally lamp lights.
CLOCK SET
(Camera)
(PB)
Sets the built-in calendar of the camera.
indicates the factory setting.
META DATA screen