Filter
Top Products
110
___indicates the factory setting.
Item
Display
mode
Description of settings
ACCESS LED (Camera)
(MCR)
Sets the access lamp to ON or OFF.
ON:
The lamp lights up and blinks as per the regular specications.
OFF:
The lamp is OFF in all circumstances.
REC LAMP
(Camera) Sets lighting of the tally lamp.
OFF:
The tally lamp does not light.
FRONT:
Front tally lamp (microphone side) lights.
REAR:
Rear tally lamp (viewnder side) lights.
BOTH:
Both tally lamps light.
BEEP SOUND (Camera) Turns the beep sound ON or OFF.
ON, OFF
When ON is selected, the beep is sounded when the memory of the P2
card has been used up during recording.
When the beep is sounded, the audio signals from the output connector
are muted before the beep sound is output.
CLOCK SET (Camera)
(MCR)
Sets the camera-recorder’s calendar.
TIME ZONE (Camera)
(MCR)
Adds to or deducts from GMT the time value of -12:00 to +13:00 in
30-minute steps. (As an exception, you can set +12:45.) Refer to the
table below.
0:00
Time
difference
Area
Time
difference
Area
00:00 Greenwich - 00:30
– 01:00 Azores Islands – 01:30
– 02:00 Mid-Atlantic – 02:30
– 03:00 Buenos Aires – 03:30 Newfoundland Island
– 04:00 Halifax – 04:30
– 05:00 New York – 05:30
– 06:00 Chicago – 06:30
– 07:00 Denver – 07:30
– 08:00 Los Angeles – 08:30
– 09:00 Alaska – 09:30 Marquesas Islands
– 10:00 Hawaii – 10:30
– 11:00 Midway Island – 11:30
– 12:00 Kwajalein + 11:30 Norfolk Island
+ 13:00 + 10:30 Lord Howe Island
+ 12:00 New Zealand + 09:30 Darwin
+ 11:00 Solomon Islands + 08:30
+ 10:00 Guam + 07:30
+ 09:00 Tokyo + 06:30 Rangoon
+ 08:00 Beijing + 05:30 Bombay
+ 07:00 Bangkok + 04:30 Kabul
+ 06:00 Dacca + 03:30 Tehran
+ 05:00 Islamabad + 02:30
+ 04:00 Abu Dhabi + 01:30
+ 03:00 Moscow + 00:30
+ 02:00 Eastern Europe + 12:45 Chatham Islands
+ 01:00 Central Europe
Setup menu list (continued)
OTHER FUNCTIONS screen (continued)