Reference
119
Cleaning
When cleaning, do not use benzene or thinner.
Using benzine or paint thinners may deform the
camera-recorder and/or cause the surface nish
to peel off.
Before proceeding with maintenance, remove the
battery or disconnect the AC cord from the power
outlet.
Use a soft, clean cloth to wipe the camera-
recorder. To remove stubborn dirt, wipe the
camera-recorder with a cloth moistened with
kitchen detergent that has been diluted with
water and then use a dry cloth to take up the
remaining moisture.
Cleaning the Viewnder
If there is dust inside the view nder, remove the
eye cup holder and get rid of the dust.
The interior of the eye cup holder is specially
nished, so do not ever wipe it. If there is dust on
it, blow it off with an air blower.
Remove the eye cup holder with the eye cup
attached by rotating it counterclockwise. (It will
be tightly screwed on.) When you do this, tilt the
view nder slightly upward.
To amount the eye cup holder, align the
ridges and grooves of the eye cup holder and
camerarecorder, and turn clockwise until the
holder clicks into place.
•
•
•
•
•
•
•
Eye cup holder
Eye cup
Projection