Filter
Top Products
34
Shooting in manual mode
Set the unit to manual mode when manually
adjusting the focus, iris, gain and white balance.
Switching to manual mode
Slide the AUTO/MANUAL switch to MANUAL to
switch to the manual mode. (
A
on the viewnder
and LCD go out).
AUTO/MANUAL switch
Manual focusing
FOCUS switch
PUSH AUTO button AUTO/MANUAL switch
Focus ring
FOCUS/IRIS switch
1 Use the AUTO/MANUAL switch to switch to
manual mode.
2 Use the FOCUS switch to choose how to
control focusing.
A (AUTO):
Auto focus mode
M (MANUAL):
Manual focus mode
Turn the focus ring by hand.
∞:
The camera rst focuses on innity, then it
switches to manual focus.
The FOCUS switch automatically moves
back to M (MANUAL) after you move it to ∞.
3 Use the FOCUS RING (FOCUS/IRIS) switch
to change the function assigned to the
focus ring.
FOCUS: Adjusts focus.
IRIS: Adjusts iris (aperture).
When setting the FOCUS switch to M, also
set the FOCUS RING (FOCUS/IRIS) switch to
FOCUS.
Temporarily switching to auto focus
Even if you have switched FOCUS to M (MANUAL)
the camera will focus automatically while you press
down PUSH AUTO.
Switching to manual focus assist mode
To change from the manual focus mode to the
manual focus assist mode, set MF ASSIST to ON
on the setting menu SW MODE screen.
You can make coarse adjustments to the focus
in manual focus assist mode by turning the focus
ring about half the amount you would turn it in
manual focus mode.
Fine adjustment is made automatically after you
operated the focus ring.
If the focus differs considerably form the manually
set focus, the focus may not be set correctly.
Automatic adjustment is not performed until you
operate the focus ring for the next time.
Auto focus may not work properly if there is
ickering.
Select a shutter speed suited to the ambient light.
(Page 48)
If the auto focus mode is set with any format
except 50i and 50P, controlling the focus will take
slightly longer than in the normal focus mode.
If you have set ON for the AF item on the setting
menu AUTO SW screen, auto focusing will occur
regardless of the position of the FOCUS switch
when the auto mode has been established.
(Page 103)
During macro shooting “AF”, “MF” or “MA” will be
displayed in a frame on the screen.
•
•
•
•
•
•
•
•
•