Filter
Top Products
19
● Preset ID Setting
1. Move the cursor to PRESET ID on the preset setting menu and
select ON or OFF by moving the joystick to the right or left.
ON: Preset ID is displayed on the screen.
OFF: Preset ID is not displayed.
2. Press the CAM (SET ) key to display the preset ID setting menu.
To Enter a New PRESET ID
1. Move the cursor to the desired character using the joystick,
and press the CAM (SET) key.
2. The selected character appears in the editing area. (The
pointer in the editing area moves to the right automatically at
this moment.) To enter a blank, select SPACE.
3. Repeat the above procedure until all characters are
entered.
Command
Editing
Area
Character
Area
Pointer
Character Cursor
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
Preset ID setting menu
To Copy a Preset ID from Another Position
1. Move the cursor to COPY and press the CAM (SET) key. The
preset ID in the preceding position is immediately shown.
Each consecutive pressing of the CAM (SET) key displays the
ID preceding the one currently displayed.
2. Display the most prospective ID.
3. Follow the step “To change an entered PRESET ID” if neces-
sary.
To Change an Entered PRESET ID
1. Move the pointer to the character to be edited in the editing
area by using the joystick, and press the CAM (SET) key.
2. Select a new character by using the joystick.
3. Press the CAM (SET) key to determine the PRESET ID.
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
To Delete an Entered PRESET ID
Move the cursor to RESET and press the CAM (SET) key.
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
PRESET NO. 1*
POSITION SET
PRESET ID
ALC/MANUAL
DWELL TIME
SCENE FILE
PRESET SPEED
RET DEL
ON
ALC
10S
OFF
••••••••|
L H
Preset setting menu