Panasonic WV-CS854A Security Camera User Manual


 
54
Gray
White
Pink
Yellow green or light blue
Black
Brown
Red
Orange
Yellow
Light blue or green
Blue
Purple
Wire color
Wire color
RS485 Connection
Note:
Use the cable that is described below for RS485 site communication.
Shielded, twisted pair cable
Low impedance
Wire gauge size is thicker than AWG #22 (0.33 mm
2
).
ALARM IN Connections
An 8-pin and a 4-pin harness are supplied with the camera as standard accessories. Connect exter-
nal sensors to this connector. Input specifications are low-active, non-voltage contact (ON when
active) or open collector (Low when active). The table below shows wire colors versus pin functions.
GND
Brown
Red
Data transmission
Data reception
Orange
Yellow
Green
T (B)
T (A)
R (B)
R (A)
Note: Use a relay if the voltage or current of the connected device exceeds the ratings.
ALARM OUT Connections
Connect an external device, for example, a buzzer or lamp, to this connector. Output specifications
are low-active, open-collector and a drive capacity of 16 V DC 100 mA maximum. The table below
shows wire colors versus pin functions.
Function
OUT 1
GND
OUT 2
GND
Alarm OUT (4-pin)
Function
IN 1
GND
IN 2
GND
IN 3
GND
IN 4
GND
Alarm IN (8-pin)