Filter
Top Products
VQT1Z66
118
Advanced (Playback)
∫ Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
Automatic input switching:
•
If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel
on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it
will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
• Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV.)
• If VIERA Link does not work properly, refer to page 142.
Note
•
If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the
operating instructions for the devices.
• Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV.
• Operation is not possible with a cable that is not based on the HDMI standard.
Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m), RP-CDHM30 (3.0 m)
• VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to
the PC or the printer.
• [HDMI MODE] (P31) [1080i] is valid only for the following conditions:
Outputting to HDMI:
–When [PICTURE] is selected in the [MODE PLAY]
–When [PICTURE ONLY] is selected in the [SLIDE SHOW]
–When [CATEGORY SELECTION]
¢
is selected in the [SLIDE SHOW]
When the [VIERA Link] is set to On:
–When the [ ] displayed on the TV screen is selected
–When [PICTURE ONLY] is selected for the [SLIDE SHOW]
–When [CATEGORY SELECTION]
¢
is selected for the [SLIDE SHOW]
¢ Other than [ ] (travel date)
–It will be output as [720p] except for the above conditions.
• The screen will be blacked out for a while when displaying in 1 screen, the [HDMI MODE] (P31)
of the camera is set to [AUTO] or [1080i], and [ ] displayed on the TV screen is selected, but
this is not a malfunction.
• [ ] ([TRAVEL DATE]), [ ] ([AVCHD Lite]), or [ ] ([MOTION JPEG]) in the [CATEGORY
SELECTION] of the [SLIDE SHOW] cannot be selected when the [ ] displayed on the TV
screen is selected.
DMC-FT1&TS1GN-VQT1Z66_eng.book 118 ページ ２００９年２月３日 火曜日 午後４時１０分