Filter
Top Products
71
VQT1Z66
Advanced (Recording pictures)
• The flash setting is fixed to [Œ].
• Refer to P148 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• When motion pictures recorded with the camera are played back on other equipment, the
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
• Operational sound of the unit, which may be caused by operation or zooming, might be
recorded.
• Noise may be recorded underwater.
• When operating the zoom in recording motion pictures, it may take time to come into focus.
• If the Extra optical zoom was used before pressing the motion picture button, recordable area
will be changed drastically since these settings are cancelled.
• Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
• In recording motion pictures, [STABILIZER] is fixed to [MODE1].
• In recording motion pictures, the following functions cannot be used.
– Direction detection function
– [NATURAL] and [VIVID] in [COLOR MODE]
– Extra optical zoom (EZ)
– [FACE RECOG.]
• This unit does not support recording motion pictures on MultiMediaCards.
• Angle of view may be narrower in the motion picture compared with the still picture.
• Field of view during the recording of motion picture is displayed when [ REC AREA] (P28) is
set to [ON].
• When intelligent auto mode is selected in step 1, motion picture recording matching to the
subject or recording situation can be performed.
∫ Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its colour changes to the usual red.
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.
When set to intelligent auto mode
¦
>
[i-PORTRAIT]
[i-SCENERY]
[i-LOW LIGHT]
[i-MACRO]
DMC-FT1&TS1GN-VQT1Z66_eng.book 71 ページ ２００９年２月３日 火曜日 午後４時１０分