Filter
Top Products
89
VQT1Z66
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P25.
The camera will adjust focus automatically depending on the settings.
Applicable modes:
·¿
¢ In recording motion pictures, only [ ] (Continuous AF) can be selected.
About [] and []
[ ] will adjust the focus automatically when the jitter of the camera gets small. [ ] will
adjust the focus at all times (continuous AF operation).
The camera will adjust the focus automatically, and the focus adjustment when the shutter
button is pressed becomes faster. It is effective when you do not want to miss the photo
opportunity.
Note
•
The battery will be consumed faster than usual.
• Press the shutter button halfway again when it is difficult to focus on the subject.
• [ ] will not operate during the AF tracking.
• It is not possible to set [ ] in the following cases.
– In [NIGHT PORTRAIT], [NIGHT SCENERY], [STARRY SKY] and [FIREWORKS] in scene
mode.
• When [PRE AF] is set to [ ], it may take time to focus on the subject if you slide the zoom
lever from Wide to Tele or suddenly change the subject from a distant one to a nearby one.
For details on [REC] mode menu settings, refer to P25.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
·
[OFF]/[ON]
Note
•
When [ON] is set, [ ] is displayed on the screen.
• Even when the [SENSITIVITY] is set to [ISO80]/[ISO100], [SENSITIVITY] may be set higher
than [ISO80]/[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
[PRE AF]
[OFF]
[ ]: Quick AF [ ] is displayed on the screen.
[ ]: Continuous AF
¢
[ ] is displayed on the screen.
[I.EXPOSURE]
DMC-FT1&TS1GN-VQT1Z66_eng.book 89 ページ ２００９年２月３日 火曜日 午後４時１０分