Filter
Top Products
VQT1Z66
144
Others
• If you do not use the camera for a long time, the clock may be reset.
> When the message [PLEASE SET THE CLOCK] appears, set the clock again. When you
take a picture before setting the clock, [0:00 0. 0. 0] is recorded. (P23)
• It is possible that the subject may be warped slightly, or the borders get coloured, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
• When using the extra optical zoom, the zooming action will stop temporarily near [W]. This is
not a malfunction.
• Is the camera set to macro zoom mode? (P52)
Maximum zoom during macro zoom mode is 3k digital zoom.
• When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation. (P123)
• If the battery was inserted or removed without first turning the camera’s power off, the folder
and file numbers for the pictures taken will not be stored in the memory. When the power is
then turned back on and pictures are taken, they may be stored under file numbers which
should have been assigned to previous pictures.
• Check the clock (P22) and birthday settings (P63).
• This is the [AUTO DEMO] to introduce the features of the camera. Press a button to return the
camera to the original screen.
The clock is reset.
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colours which are not actually present.
Zooming stops instantaneously.
Zoom does not go up to maximum magnification.
The file numbers are not recorded consecutively.
The file numbers are recorded in ascending order.
[AGE] is not displayed correctly.
When the camera is left alone, the slide show is suddenly displayed.
DMC-FT1&TS1GN-VQT1Z66_eng.book 144 ページ ２００９年２月３日 火曜日 午後４時１０分