Panasonic DMCZS40K Digital Camera User Manual


 
Application (Record)
Burst function
VQT5E74- 102 -
Recording mode:
A burst of still pictures can be recorded while the shutter button is pressed fully.
Press [ ] button ( )
Use to select [Burst] and press [MENU/SET]
To change the burst setting, press the [DISP.] button and select a setting with .
Setting Speed Description
No. of
pictures
*
2
*
1
Approx. 2 - 10
pictures/sec.
The burst speed is adjusted automatically in
accordance with the movements of people, pets
or other subjects. ([Intelligent Burst mode])
When a fast-moving subject is recorded, the
frame rate becomes faster and the number
of pictures that can be recorded in a series is
restricted to about 10.
100
Approx. 2
pictures/sec.
The subject is brought into focus as far as this
is allowed by the burst speed (excluding [MF]).
However, when the burst function is operating
during motion picture recording, the focus is
fixed to the first picture.
The pictures are taken with the burst function
while the exposure and White Balance are
being adjusted.
The burst speed may be reduced under certain
recording conditions.
100
Approx. 5
pictures/sec.
*
1
[Intelligent Auto] Mode only
*
2
The number of burst pictures is limited by the picture-taking conditions and the type and/or
status of the card used.
(Continued on the next page)