Panasonic DMCZS40K Digital Camera User Manual


 
Application (Record)
Changing the settings assigned to the
control ring/control dial
VQT5E74- 134 -
Recording mode:
Changes the settings assigned to the control ring/control dial.
Select [Ring/Dial Set] from [Setup] menu and press
[MENU/SET] (→60)
Use to select [ ] (control ring) or [ ] (control dial) and
press [MENU/SET]
Use to select the setting and press [MENU/SET]
Control ring
Control dial
[DEFLT] [Default Control]
[Zoom] (→80)
[Step Zoom] (→83)
[Exposure Comp.] (→100)
[Aspect Ratio] (→140)
[Sensitivity] (→142)
[White Balance] (→144)
[OFF] [Not Set]
• To return to the default setting,
select [Default Control]. (→33)
• If you do not use the control ring,
select [Not Set].
When the settings assigned to both the control ring and control dial
have been changed
• Program Shift cannot be used in [Program AE] Mode.
• The following operations can be performed from the Quick menu (→34):
- Aperture adjustment in [Aperture-Priority] mode
- Shutter speed adjustment in [Shutter-Priority] mode
- Aperture and shutter speed adjustment in [Manual Exposure] mode
The assigned function setting applies to all the Recording Modes.
However, the assigned function may not operate when combined with certain
Recording Mode.
Manual Focus can be performed from the Quick menu even if the control ring settings
have been changed. (→34)