Panasonic DMCZS40K Digital Camera User Manual


 
Wi-Fi/NFC
Operating the camera using a smartphone/tablet
VQT5E74
- 196 -
You can register up to 20 smartphones. If the number of registered smartphones
exceeds 20, registrations will be deleted starting from the smartphone touched first.
If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted.
If the communication environment is bad, the NFC function may not be usable.
If there is not a response immediately, shift the position slightly.
Do not bump your smartphone strongly against this unit.
See the operating instructions of your NFC-compatible smartphone for more
information about smartphone operation and settings.
Metal objects between this unit and the smartphone may interfere with
communication. Also, any stickers, etc., near the NFC area may affect communication
performance.
You can still connect to the smartphone even if the camera is turned off. The camera
lens may come out when the power is turned on after making a connection. Be careful
that the vibration does not cause the camera to drop.
The NFC function cannot be used in the following cases:
• When connected to a television, computer, or printer
• When recording motion pictures
• During motion picture playback, during slide shows, and during panorama playback
(including pauses in each case)
• While sending pictures by Wi-Fi
• While recording still pictures (during self-timer countdown)
• While editing
• When the [Airplane Mode] is [ON]
After “Image App” is forced to end or after the connection has been canceled, it is
necessary to hold the smartphone close to the camera again.
Taking pictures via a smartphone/tablet (remote recording)
Connect to a smartphone (→190)
Select [ ] from “Image App”
• The recorded images are saved in the camera.
• Motion pictures can also be recorded.
• When using zoom, the camera could tilt when the lens barrel extends. Make sure
to secure the camera in place with a tripod or by other means.
• Some settings are not available.