Connecting with other devices
Storing recorded still pictures and motion
pictures in the recorder
VQT5E74- 283 -
Follow the correct method for your device.
Copying by inserting the card into the recorder
You can copy pictures using Panasonic equipment (such as
Blu-ray disc recorders) with support for each file format.
• See the instruction manual for the recorder for details for copying
and playing back.
32
3232
Dubbing playback pictures via AV cables (optional)
Videos that are played on this camera can be dubbed on media such as a disc, hard disk
or videotape using a device such as a video recorder. This method is useful as it allows
dubbing to be performed even with devices that are not compatible with high definition
images. Picture quality will be reduced from high definition to standard definition. Audio
will be monaural.
Connect camera to recorder
AV cable (optional)
To recorder’s input socket
Check the plug direction and insert it straight
in.
(If the cable is inserted in the wrong direction,
the plug could become deformed and cause
faulty operation)
Also, do not insert into the wrong socket.
Doing so may cause damage to this unit.
Start playback on camera
Start recording on recorder
• To stop recording (dubbing), stop the recording on your recorder first before
stopping the playback on the camera.
●
Always use a genuine Panasonic AV cable (optional).
●
When using a TV with a 4:3 aspect ratio, always change the camera’s [TV Aspect]
setting (→72) to [4:3] before dubbing. Motion pictures copied in the [16:9] setting will
appear vertically stretched when viewed on a 4:3 TV screen.
●
For details on dubbing and playback methods, refer to your recorder’s operating
instructions.