Filter
Top Products
58
For assistance, call 1-800-272-7033.
Communication Function
1Set POWER OFF before inserting the
CompactFlash card and modem card.
Insert the CF Card and Compact
Modem Card into the CompactFlash
Card Slots in the direction of the arrow
mark and so that the arrow mark side
of the card faces the front (lens side) of
the Digital Camera.
2Push the cards fully into the
CompactFlash Card Slots.
3Connect the Modem Cable into the
Modem Card, and connect Modular
Jack to the Modular Cord.
Image file transfer via a regular telephone
line using the Compact Modem Card.
Refer to Remote Access (pages 61~73)
and Communication (pages 74, 75) for
complete operating instructions.
Please also see the diagram on page 59 to
view the Compact Modem functions.
CARD SLOT 1
CARD SLOT 2
CompactFlash Card
Compact Modem
Card
(PV-DC2590 only)
Modem Card Slot
Modular Cord
(Sold separately)
How to attach the Ferrite Core
Attachment to the modular cord to for FCC Standard observance.
1Open the catch of the Ferrite Core.
2Wind the modular cable cord tightly
around the opened Ferrite Core to
make one complete loop as shown.
3Close the Ferrite Core Housing.
4Thread the cable tie through the hole
in the Ferrite Core Housing.
5Fasten the Ferrite Core Housing on
the cable so that it does not move.
1
2
3
4
5
Note :
Communication Function is only available in the USA.
This is not an e-mail function.