Filter
Top Products
123
LSQT0969
With a computer (VDR-D200 only)
Using an SD card on a computer (Macintosh)
Using an SD card on a computer (Macintosh)
¬Connect this unit to the AC adaptor.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[ USB FUNCTION] # [PC CONNECT] and press the joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a computer.
icon appears.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ When the unit is connected to a computer, the
operation mode cannot be changed and its
power cannot be turned off.
In this case, disconnect the USB cable (l 124).
≥ When a computer is accessing a card in this unit,
the card access lamp lights. ( appears on the
LCD monitor.) Do not disconnect the USB cable or
AC adaptor while the card is being accessed as it
may damage the data.
Connection
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
A
D200(P_PC)eng.book 123 ページ ２００６年１月１８日 水曜日 午後５時４６分