82
LSQT0969
Editing
Editing still pictures (VDR-D200 only)
(SD)
You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD
card.
¬Rotate the mode dial to select .
1 Press the MENU button, then select
[PLAYSETUP] # [ DPOF SET] # [SET] and
press the joystick.
2 Select the file to be set, then press the joystick.
The number of prints set to be in DPOF is displayed.
3 Move the joystick up or down to select the number of prints, then
press the joystick.
≥ You can select from 0 to 999. (The selected number of pictures can be printed with the printer
supporting DPOF.)
≥ To cancel the setting, set the number of prints to [0].
≥ To set other files, repeat steps 2–3.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select [ PLAY SETUP] # [ DPOF SET] # [CANCEL ALL] and
press the joystick.
≥ When the confirmation message appears, select [YES], then press the joystick.
∫ What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to be written
onto an SD card so that it can be used on a system supporting DPOF.
≥ The DPOF setting can be established for up to 999
files.
≥ DPOF setting made on other devices may not be
recognized by this unit. Please perform the DPOF
settings on this unit.
≥ You cannot add the recording date to pictures to be
printed with the DPOF settings.
DPOF setting
This is for writing the printing data on an SD card.
D200(P_PC)eng.book 82 ページ 2006年1月18日 水曜日 午後5時46分