Panasonic VDR-D100 Camcorder User Manual


 
138
LSQT0969
Troubleshooting
Others
With a computer (Windows)
Problem Check points
The indication
disappears.
The screen is frozen.
No operation can be
performed.
Is this unit connected to a computer?
# No operation can be performed on this unit when it is
connected to a computer.
Turn off the power to this unit. If the power cannot be
turned off, press the RESET button, or remove the battery
or AC adaptor and then reattach it. After that, turn on the
power again. If normal operation is still not restored,
detach the power connected, and consult the dealer who
you purchased this unit from.
“PUSH THE RESET
SWITCH.” is displayed.
The unit has automatically detected an
error. Press the RESET button with the
projecting part of the lens cap. This will
restart the unit.
If you do not press the RESET button,
the power to this unit is turned off automatically about 1
minute later.
Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the
appliance by yourself.
Problem Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
Have you set this unit to the correct mode?
# The unit is not recognized if it is set to recording mode.
# Disconnect the USB cable, set [USB FUNCTION] to
[PC CONNECT] and then reconnect the USB cable.
Select another USB terminal on the computer.
Check the operating environment. (l 98)
Turn on the power to this unit.
When
DVD-MovieAlbumSE is
started, the [Mount
Information] dialog box
appears.
A disc other than a DVD-RAM or a DVD-RW (VR format) is
loaded in the drive: DVD-MovieAlbumSE cannot be used
for media other than DVD-RAM or DVD-RW (VR format).
If there are multiple drives, a drive other than this unit may
be selected. Click the [Preference] button in the dialog box,
click the [Device setting] tab to choose the drive where the
disc is loaded in the [Drive Select] column, and then click
[OK].
If an error message appears even after a compatible disc is
inserted, packet writing software may be installed in your
computer. Uninstall the packet writing software.
D200(P_PC)eng.book 138 ページ 2006年1月18日 水曜日 午後5時46分