Panasonic VDR-D100 Camcorder User Manual


 
43
LSQT0969
Recording
Recording still pictures (VDR-D200 only)
Recording still pictures (VDR-D200 only)
(SD)
Record the still picture on an SD card.
1 Remove the lens cap, then turn the unit on.
If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not
function properly.
2 Rotate the mode dial to select .
3 Press the PHOTO SHOT button.
The unit automatically focuses on the subject at the center of screen
(when auto focus is selected).
The size of pictures: 640k480 pixels
For information about the number of recordable still
pictures on an SD card (l 149)
The sound cannot be recorded.
If the write protection switch on the SD card is set to
LOCK, it cannot be used for recording.
If set [PICT.QUALITY] # [ ], mosaic-pattern
noise may appear on a playback image depending
on the picture content.
While the card access lamp is lit, do not perform the
following, as doing so may damage the SD card or
the data on the card.
Turn the unit off.
Insert or remove the SD card.
Operate the mode dial.
Another product may degrade or not play back still
pictures recorded on this unit.
D200(P_PC)eng.book 43 ページ 2006年1月18日 水曜日 午後5時46分