Filter
Top Products
24
For assistance, please call : 1-800-272-7033.
POWER Switch
1Press REC MODE repeatedly to select
Motion ( ) or Burst ( ) recording
mode.
2Press ZOOM T or W to zoom In and
Out.
• Zoom magnification level is up to 3X.
3Press SHTR down halfway to lock
Auto Focus.
• Beep sounds twice. (See page 26.)
4Hold down the SHTR button the rest of
the way to actually capture the image.
If you select AUDIO ON, audio will be
recorded through the MIC. (See page
22.)
3, 4SHTR
(SHUTTER)
You can select
Motion Image capture
or Burst Image capture as the REC
MODE.
Remove the Lens Cap. Set the POWER
to REC or MANUAL REC.
(See pages 18, 19.)
Before you begin
MIC
LCD
Viewfinder
2ZOOM Switch
1REC MODE Button
• If you select , you can not record
audio.
• The next image cannot be captured until
the previously captured image is no
longer displayed on the LCD Viewfinder.
• Power shuts off if there is no activity over
1 minute with Battery as a power source
to conserve power. Press SHTR to turn
power back on.
Motion Image Rec Mode,
Burst Rec Mode
REC MODE
• A Motion Image with audio can be
captured for up to 12 seconds.
REC MODE
• A burst of up to 5 images with no
audio (one frame every 0.9 seconds)
can be captured while SHTR is
pressed.
• While the Digital Camera processes
the image, REC will flash on the LCD
Viewfinder and the captured image
will be displayed on the LCD
Viewfinder for a few seconds.
Capturing Images
Capturing Images
Note
SD5000. p21-24.p65 80/01/04, 11:3924