Filter
Top Products
Special Features
39
Special Features
POWER Switch
1Press or to select SELF TIMER
and press
or to select ON.
This puts the camera in self-timer
mode.
• After ON is selected and MENU is
pressed,
mark will appear on the
LCD Viewfinder (see page 9).
2Press MENU to exit.
3Press SHTR.
• The Self-Timer Indicator lights up.
The indicator starts flashing rapidly
after about 8 seconds and the image
is captured about 2 seconds later.
• The Self-Timer setting returns to
OFF mode each time an image is
captured. Repeat these steps each
time Self-Timer is used.
Self Timer Recording
Self Timer Recording
The Self-Timer allows you to capture an
image about 10 seconds after pressing
the shutter.
Set the POWER Switch to REC or
MANUAL REC. (See pages 18, 19.)
Press MENU to display the MENU
screen.
Before you begin
[ REC Mode ] [ MANUAL REC Mode ]
2MENU Button
1Select Button
/ / /
Self-Timer Indicator
3SHTR
(SHUTTER)
• SELF TIMER is set to ON, the
RAPIDFIRE™ and TIME LAPSE functions
are automatically disabled and can not be
set to ON.
Note
SD5000. p36-40.p65 80/01/04, 11:4039