Filter
Top Products
40
For assistance, please call : 1-800-272-7033.
POWER Switch
Time Lapse Recording
Time Lapse Recording
1Press or to select TIME LAPSE
and press
or to select time
interval.
You can select a capture rate of
approx. 1MIN, 5MIN, 10MIN, 30MIN,
1HOUR, 6HOUR, 12HOUR, or
24HOUR.
• Time Lapse feature is available with
Super Fine (SF), Fine (F), Normal (N) and
Zoom (2X, 3X) mode.
If the REC mode is set to
, or TIFF
mode, change REC mode. (See page
25.)
2Press MENU to set time lapse mode.
3Press SHTR to start time lapse mode
recording.
• REC will flash on the LCD Viewfinder
while image is being processed.
• Press MENU to exit this mode.
• During time lapse recording (even
during non-recording intervals), the
battery may become depleted. Therefore,
using an AC Adaptor (supplied) is
recommended.
• During time lapse, the ZOOM area is not
displayed.
Time Lapse enables you to set the camera
to automatically capture an image from
once every minute to once every 24 hours.
Set the POWER Switch to MANUAL
REC. (See page 19.) Press MENU to
display the MENU screen.
Before you begin
2MENU Button
1Select Button
/ / /
3SHTR (SHUTTER)
Note
• TIME LAPSE is set to ON, the
RAPIDFIRE™ and SELF TIMER functions
are automatically disabled and can not be
set to ON.
Note
SD5000. p36-40.p65 80/01/04, 11:4040