Filter
Top Products
45
Special Features
Special Features
POWER Switch
To Copy All Images
To Copy All Images
You can copy all of the images stored on a
Disk Media to another Disk Media using
this operation.
1Press or to select COPY.
2Press to display COPY menu and
press
or to select COPY ALL.
3Press to display COPY ALL menu
and press or to select YES.
• Select NO to return to the COPY
MENU.
4Press SHTR to copy.
• “PLEASE WAIT”, then “PLEASE
CHANGE DISK” is displayed. After
Disk is changed, “PLEASE WAIT” is
displayed as all of the images are
copied. When copying is complete,
the screen below will be displayed.
• Press MENU twice to exit.
Important:
• While “PLEASE WAIT” is displayed, do
not turn off the Digital Camera or
unplug the AC Adaptor (supplied)
because this will cause irreversible
damage to the memory, resulting in
reduced image storage capacity.
• When copying images from one disk to
another, the images are temporarily stored in
camera memory before being copied to the
target disk. As the camera memory is only
equal to about one Floppy Disk, all the
SuperDisk Diskette images cannot be stored
and COPY ALL cannot be used. If COPY ALL
is selected when SuperDisk is the source,
“CANNOT COPY ALL THE SUPERDISK” will
be displayed.
• If the memory capacity of the target SuperDisk
Diskette or Floppy Disk is insufficient, the
following message will appear.
• You can copy images from a Floppy Disk to
another Floppy Disk or a to SuperDisk
Diskette providing the TARGET disk has
enough space.
Set the POWER Switch to PLAY.
(See page 19.) Press MENU to display
the MENU screen.
Before you begin
4SHTR (SHUTTER)
1, 2, 3
Select Button
/ /
Note
MENU Button
SD5000. p44-46.p65 80/01/04, 11:4145