Filter
Top Products
Special Features
37
Special Features
POWER Switch
White Balance
White Balance
1Press or to select WHITE
BALANCE and press
or to select
one of the four settings shown below.
• Default setting is AUTO.
AUTO (No indication) :
Automatically maintains
optimum color balance in
most lighting conditions.
: When the source illumination
is a halogen lamp.
: When shooting outdoors on a
sunny day.
WS (SET) : Manually sets the color
balance to a fixed position
based on the current lighting
environment.
• Aim the camera at white
object (important: white
object must fill entire LCD
viewfinder).
• Press SHTR button.
2Press MENU to exit.
• Selected mode will appear on the
LCD Viewfinder. (See page 9.)
During normal use, Auto White Balance
automatically maintains optimum color
balance. If this is not the case, set
manually.
Set the POWER Switch to MANUAL
REC. (See page 19.) Press MENU to
display the MENU screen.
Before you begin
2MENU Button
• When the Camera is set to POWER OFF,
the white balance setting will be stored in
Camera memory. When the Camera is
set to POWER ON, the white balance
setting will default to the previous setting.
1Select Button
/ / /
Note
SD5000. p36-40.p65 80/01/04, 11:4037