Filter
Top Products
Others
115
LSQT1190
Recorded still pictures
are not clear.
≥ Are you trying to record small or finely detailed objects with
[PICT. QUALITY] set at [ ]?
# If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [ ], the images may break up into a
mosaic-like pattern. Record with [PICT. QUALITY] set at [ ]
instead. (l 47)
Auto focus function does
not work.
≥ Is manual focus mode selected?
# Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥ Are you trying to record a scene which is hard to bring into
focus in auto focus mode?
# There are some recording subjects and surroundings for which
the auto focus does not operate correctly. (l 122) If so, use the
manual focus mode to adjust the focus. (l 56)
“OPEN LENS COVER.” is
displayed.
≥ Have you left the lens cover closed?
# Open the lens cover before turning the unit on.
≥ This message may appear if you try to record in extremely dark
places.
Sound is not played back
from the built-in speaker
of this unit.
≥ Is the volume too low?
# During playback, move the volume lever to display the volume
indication and adjust it. (l 62)
Although this unit is
correctly connected to a
TV, playback images
cannot be seen.
The playback images are
squeezed horizontally.
≥ Have you selected video input on the TV?
# Please read the operating instructions of your TV and select the
channel that matches the input used for the connection.
≥ Is the [TV ASPECT] setting correct?
# Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP] # [TVASPECT]
# [16:9] or [4:3] and press the joystick.
Scenes or files cannot be
deleted or edited.
≥ Are the scenes or the files locked?
# Locked scenes or files cannot be deleted. Release the lock
setting. (l 67, 72)
≥ It may not be possible to delete scenes that are displayed as
[ ] on the thumbnail display. If the scenes are unnecessary,
format the HDD or card to erase the data. (l 75) Please be
aware that if the HDD or a card is formatted then all the data
recorded on the HDD or the card will be erased.
≥ If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. (l 22)
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Store important data on a
computer or other products as well.
Even if HDD or a card is
formatted, it cannot be
used.
≥ Either this unit or the card may be damaged. Please consult a
dealer.
≥ Use an SD card from 8 MB to 4 GB with this unit. (l 21)
Problem Check points
LSQT1190(ENG).book 115 ページ ２００７年１月１３日 土曜日 午後３時３２分