Panasonic SDR-H20 Camcorder User Manual


 
90
LSQT1190
With a computer
1 Connect this unit and a
computer.
A USB cable (supplied)
Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The USB function selection screen will appear.
2 Select [PC CONNECT] # [HDD]
or [SD CARD] and press the
joystick.
This unit will be automatically recognized by the
computer and ImageMixer3 will start
automatically.
If ImageMixer3 fails to start automatically, take
the following steps to start it.
Select [start] #
[All Programs (Programs)] #
[PIXELA] # [ImageMixer3 for
Panasonic] # [ImageMixer3 for
Panasonic].
3 Click [Playback/Import Video].
The browser screen is displayed.
4 Select [SDR-H200]/[SDR-H20]/
[SDR-H18] (HDD) or [Removable
Disk] (SD card) in [Source].
The contents recorded on the HDD or SD card
are displayed.
5 (To play back the scenes)
Click the desired scene and click
[Playback] (A).
(To import images to your computer)
Click the desired scene and click
[Import] (B).
Imported images can be checked by clicking
[Library].
Imported images can be edited using
ImageMixer3. For details, refer to software
help. (l 86)
You can change the location where imported
images will be saved by selecting from the
menu bar [Settings] # [Preferences] #
[Library destination settings:].
A
Motion pictures
Still pictures
A B
LSQT1190(ENG).book 90 ページ 2007年1月13日 土曜日 午後3時32分