Panasonic SDR-H20 Camcorder User Manual


 
Others
116
LSQT1190
The indication
disappears.
The screen is frozen.
No operation can be
performed.
Is this unit connected to a computer?
# No operation can be performed on this unit when it is connected
to a computer.
Turn off the power to this unit. If the power cannot be turned
off, remove the SD card then press the RESET button, or
remove the battery or AC adaptor and then reattach it. After
that, turn on the power again. If normal operation is still not
restored, detach the power connected, and consult the dealer
who you purchased this unit from.
“PUSH THE RESET
SWITCH.” is displayed.
The unit has automatically detected an error. Remove the SD
card then press the RESET button to restart the unit.
# (SDR-H200) Press the RESET button with the projecting part of
the grip belt A.
# (SDR-H20/SDR-H18) Press the RESET button with the
projecting part of the lens cap B.
If you do not press the RESET button, the power to this unit is
turned off automatically about 1 minute later.
Even after you press the RESET button, the indication may still
appear repeatedly. If so, this unit needs repair. Detach the
power connected, and consult the dealer who you purchased
this unit from. Do not attempt to repair the appliance by
yourself.
If the SD card is inserted
in this unit, it is not
recognized.
Is the SD card formatted on a computer inserted?
# Use this unit to format SD cards. Please be aware that if an SD
card is formatted, then all the data recorded on the card will be
erased. (l 75)
If the SD card is inserted
in another device, it is not
recognized.
Check that the device is compatible with the capacity or type of
SD card (SD Memory Card/SDHC Memory Card) that you
inserted.
# Refer to the operating instructions of the device for details.
Problem Check points
A
B
LSQT1190(ENG).book 116 ページ 2007年1月13日 土曜日 午後3時32分