Filter
Top Products
Others
117
LSQT1190
With a computer (Windows)
Problem Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
≥ The USB function selection screen does not appear if the USB
cable is connected while the menu screen is displayed.
# Close the menu screen before connecting the USB cable.
≥ Select another USB terminal on the computer.
≥ Check the operating environment. (l 83)
≥ Disconnect the USB cable, turn the unit off then on and then
reconnect the USB cable.
An image that should
have been recorded does
not appear when
ImageMixer3 is started.
≥ If there are multiple drives, a drive other than this unit may be
selected.
# HDD: Select [SDR-H200], [SDR-H20] or [SDR-H18] from
[Source].
SD card: Select [Removable Disk] from [Source].
When the USB cable is
disconnected, an error
message will appear on
the computer.
≥ To disconnect the USB cable safely, double-click the
icon
in the task tray and follow the instructions on the screen.
The DVD COPY function
will not start even when I
press the DVD COPY
button.
≥ To create DVD-Video discs using the DVD COPY function, you
need to install ImageMixer3 for Panasonic from the supplied
CD-ROM to your computer. (l 85)
≥ The DVD COPY function cannot be used in the video recording
mode or picture recording mode.
# Rotate the mode dial to select or , then press the
DVD COPY button.
I cannot copy images
using the DVD COPY
function.
≥ Have you already copied those images using the DVD COPY
function?
# Once images have been copied using the DVD COPY function,
they cannot be copied a second or subsequent time.
Import the images into ImageMixer3, and then write them on the
DVD disc. (l 91)
It takes a long time to
create a DVD.
≥ Creating a DVD may take some time when the size of the
motion picture files are small.
The amount of free space
on the HDD or SD card
does not increase even
when the images are
backed up on the
computer or DVD discs.
≥ The unit’s image data is not automatically deleted even when
you have imported images to your computer or onto DVD
discs using ImageMixer3.
# To increase the amount of free space on the HDD or SD card,
delete unnecessary images recorded on this unit. (l 66, 71)
The DVD player cannot
play back the discs I have
created using
ImageMixer3.
≥ To playback a DVD disc created using ImageMixer3, the player
must support playback of that DVD disc. (Refer to the
operating instructions of the player.)
The DVD-RAM disc
cannot be recognized.
≥ If a DVD-RAM driver is installed in your computer, uninstall it.
LSQT1190(ENG).book 117 ページ ２００７年１月１３日 土曜日 午後３時３２分