Panasonic SDR-H20 Camcorder User Manual


 
29
LSQT1190
Setup
To turn on the power
Open the LCD monitor.
The status indicator lights and the power turns
on.
To turn off the power
Close the LCD monitor.
The status indicator goes off and the power turns
off.
The power will not turn off while recording even
if the LCD monitor is closed.
Inserting/removing an SD
card
Before inserting/removing an SD card, be
sure to set the OFF/ON switch to OFF.
1 Set the OFF/ON switch to OFF to
turn off the power.
Check that the status indicator has gone off.
2 Open the LCD monitor and then
slide the card slot open lever A
to open the card slot cover.
3 Insert/remove the SD card into/
from the card slot.
When inserting an SD card, face the label side
B upwards and press it straight in as far as it
goes.
When removing the SD card, press the center
of the SD card and then pull it straight out.
Set the OFF/ON switch to OFF when the unit
is not being used.
If the SD card is inserted or removed while the
OFF/ON switch is set to ON, this unit may
malfunction or the data recorded on the SD
card may be lost.
A
B
LSQT1190(ENG).book 29 ページ 2007年1月13日 土曜日 午後3時32分