Filter
Top Products
98
LSQT1190
With a computer
∫ Example folder structure
HDD
SD card
≥ SD-Video format motion pictures are stored in
the [PRG¢¢¢] folder. (“¢¢¢” denotes
base-16 (hexadecimal) characters from 001 to
FFF.)
≥ Up to 99 files can be recorded in the
[PRG¢¢¢] folder.
≥ JPEG format still pictures (IMGA0001.JPG
etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software
that supports JPEG pictures.
≥ Up to 999 files can be recorded in the
[100CDPFP] or other such folder.
≥ The DPOF setting files are recorded in the
[MISC] folder (SD card only).
≥ Do not use the computer to delete the SD
card’s folders. Otherwise, it may no longer be
possible for this unit to read the SD card.
≥ Always use this unit to format SD cards.
≥ When data not supported by this unit has been
recorded on a computer, it will not be
recognized by this unit.
When the drive icon is displayed on the desktop:
Drag the icon into the Trash and
then disconnect the USB cable.
When the drive icon is not displayed on the
desktop:
Exit the application and then
disconnect the USB cable.
≥ If you disconnect the USB cable while the
ACCESS/PC lamp or card access lamp is on
or while or appears on the LCD
monitor, it may damage the data.
Using the motion picture
scenes on a computer
(Macintosh)
Using ImageMixer3, you can create a DVD-
Video disc from the images recorded on this unit.
DVD-Video discs created using this function can
be played back on a DVD player or other device.
≥ A drive that supports recordable discs is
required to create a DVD-Video disc.
≥ Before initial use, select the software’s
[ReadMe] in the folder in which the software is
installed and then read through the additional
instructions or updated information.
¬Connect this unit to the AC adaptor
and turn on the unit.
1 Connect this unit and a
computer.
A USB cable (supplied)
To disconnect USB cable
safely
Creating a DVD-Video on a
computer
A
LSQT1190(ENG).book 98 ページ ２００７年１月１３日 土曜日 午後３時３２分