Filter
Top Products
16 C634M-D (12/04)
INSTALLATION GUIDELINES
Follow these guidelines for the best system performance.
• The DX9200 recorders require connection to an uninterruptible power supply (UPS) to ensure no corruption of data during
a power loss.
• The DX9200 system must be installed in a climate-controlled room. The temperature range should be 41° to 85°F (5° to 29°C).
• All network devices that will transport DX9200 video must be capable of moving multicast traffic.
• Pelco recommends that the DX9200 recorder be installed in a ventilated rack enclosure.
• When securing the recorder to the rack enclosure, do not lift the recorder by the handles only.
• Make sure the rack enclosure is properly grounded.
• Pelco recommends that a spare phone line be installed and connected to a primary DX9100 viewstation to allow the
Pelco Technical Support Group to dial into the site upon customer request. Pelco personnel will not make changes unless
authorized by the customer. This phone line can be protected by a password to prevent unauthorized access.
Lack of adherence to these guidelines gives Pelco discretion in honoring product warranty.