Filter
Top Products
76 C634M-D (12/04)
RELAY UNIT CONFIGURATION
Follow these steps to configure a CM9760-REL relay unit.
NOTE: This programming is required only on the recorder that is physically connected to the CM9760-REL.
1. Go to Start > Programs > DX9000 Server > IO Handler Configuration. The following dialog box appears.
NOTE: You can also open the I/O Handler from the DX9000 Server Configuration Utility.
Figure 99. Relay I/O Handler Dialog Box
2. Click Select Driver on Device 1 (COM 1) or Device 2 (COM 2) to define the external device driver that is connected to the
server. The following dialog box appears.
Figure 100. CM9760 Relay Driver Dialog Box
3. Select CM9760REL.dll.