Filter
Top Products
62 C634M-D (12/04)
WEEKLY RECORDING SCHEDULE
NOTE: To make sure there is no delay during scheduled recording, begin the recording at least five minutes before the actual
recording time. For example, schedule a recording at 7:55 a.m. instead of 8:00 a.m.
1. Select the “Weekly recording schedule” radio button.
2. Click Continuous or “Event record.”
3. In the time bars, click the desired start/end times for recording for each day of the week, or enter the exact start/end
times in the “Fine tune” fields.
4. Click Apply.
The example below shows a
Continuous
weekly recording schedule from 7:05 a.m. to 12:05 p.m. The boxes in the time bars are
blue with a red border. You can make the boxes smaller or larger by dragging them with your mouse.
Figure 84. Continuous Weekly Recording Schedule Page
The example below shows a weekly
Event record
schedule from 7:05 a.m. to 12:05 p.m. The boxes in the time bars are yellow
with a red border. You can make the boxes smaller or larger by dragging them with your mouse.
Figure 85. Weekly Event Recording Schedule Page
To delete a time period:
1. Click “No record.”
2. Click the boxes in the time bars.