Filter
Top Products
C634M-D (12/04) 27
TIME SYNCHRONIZATION
All equipment in your system must have the same time. Pelco recommends you select all recorders as time synchronization
recorders. Creating this chain ensures that the system will maintain the correct time in case one or more recorders fail. All
recorders and viewstations must belong to the same workgroup or local area network (LAN).
Follow these steps for each recorder and each viewstation:
1. Close all applications on the recorder and viewstation.
2. Make sure that the recorder and viewstation are connected to the network switch.
3. Right-click
in the system tray of each unit and select Exit.
NOTE: You can use pcAnywhere to access additional recorders and viewstations. The default user name and password
is admin/admin.
4. Make sure the Date/Time Properties are correct on the recorder. You can access the date and time from the system tray.