Filter
Top Products
18 C634M-D (12/04)
Figure 6. DX9200 Rack Mount Installation
To install the unit into an equipment rack:
1. Attach the two brackets to both sides of the unit.
2. Attach the mounting rails to the equipment rack.
3. Place the unit onto the mounting rails. It should slide in and out of the rack easily.
4. Fasten the rack ears to the equipment rack.
RACK
RECORDER/VIEWSTATION
(6) SCREWS, 8-32X.250-INCH
PANHEAD
(4) SCREWS,
10-32 X.375-INCH
FLATHEAD
(8) SCREWS,
10-3 2X .375-INCH,
FLAT HEAD
BRACKET
(SIDE VIEW)
SLOTTED HOLES
TOWARDS FRONT
OF UNIT
TAPERED ENDS
TOWARDS REAR
OF UNIT
(4) SCREWS,
10-3 2X .750-INCH
PHILLIPS, PANHEAD
WITH WASHERS
REAR MOUNTING RAIL
FRONT MOUNTING RAIL
(6) SCREWS,
8-3 2X .375-INCH,
PAN HEAD WITH
WASHERS
RACK EAR