Filter
Top Products
C634M-D (12/04) 83
Figure 110. CM9760 Relay Configuration Dialog Box
6. Set the baud rate to 4800 and the parity to Even. The data translator should have these same settings.
7. Enter 1 or 2 in the COM Port field. This is the physical port on the recorder that connects to the data translator.
8. Set the Time Synch Update. This is the interval that the recorder updates the CM9760 clock. The default is 21,600
seconds (6 hours).
9. Click OK.
10. Click Test.
11. Close the I/O Handler Configuration application.
Figure 109. Device 1 Data Translator Driver Dialog Box
5. Click Configure. The following dialog box appears.
4. Click Open. The following dialog box appears.