Pelco NVR300 Security Camera User Manual


 
50 C611M-C (3/06)
Table F. Playback Controls
In addition to the playback controls listed above, you can control playback of recordings using the yellow slider in the video bar:
You can move the slider forward or backward within a recording track (lavender recording bar).
You can move the slider forward or backward from one recording track to another.
To move the yellow slider in the video bar, do the following:
1. Determine the time position within the lavender recording bar that represents the recording you wish to play. If necessary, adjust the time
slice to locate the desired recording bar.
2. Move the slider by doing either of the following:
Within the lavender recording bar that represents the recording you wish to play, click the desired time position. The slider moves to
the desired time position.
Place your cursor on the slider, click the mouse and, while holding down the mouse, drag the slider to the desired time position. Then
release the mouse.
Playback of the recording begins at the desired time position.
Playback Control Function
Time Back
Moves the time slice backward in varying intervals depending on the interval
set by the Zoom Out or Zoom In buttons. The default interval setting of the
time slice is two hours.
Time Forward
Moves the time slice forward in varying intervals depending on the interval
set by the Zoom Out or Zoom In buttons. The default interval setting of the
time slice is two hours.
Zoom In
Zooms in the time slice from a maximum of three-day intervals to a minimum
of one-minute intervals.
Zoom Out
Zooms out the time slice from a minimum of one-minute intervals to a
maximum of three-day intervals.
Velocity Slider
Controls the speed of the playback of the recording. The velocity of the
playback ranges from 0% to 200%. A value of 100% provides regular velocity,
which is the default setting. Lower values decelerate the speed; higher
values accelerate the speed.
Skip Back
Begins playback of the beginning of the previous recording track.
Rewind
Rewinds the recording. When you release the Rewind button, the recording
begins playing again.
Stop
Stops playback of the recording and returns the recording to the beginning of
the track.
Play
Plays the recording.
Pause
Temporarily stops playback of the recording. To resume playback of the
recording, click the Pause button again or click the Play button.
Fast Forward
Forwards the recording. When you release the Fast Forward button, the
recording begins playing again.
Skip Forward
Begins playback of the beginning of the next recording track.