Filter
Top Products
34
2
Quick Start
Quick Start
Taking Movies
The standard procedure for recording movies is described below.
1 Pull the grip out and rotate it into position.
2 Open the LCD monitor.
3 Press the power switch.
The camera turns on.
4 Press the C button.
Recording starts.
You can change the captured area by pressing
the Zoom/
w
/
x
lever to the right or left.
Press the lever gently to change the
captured area slowly and press it all the way
to change the area quickly.
x : enlarges the subject.
w : enlarges the area captured by the
camera.
5 Press the C button again.
Recording stops.
Using the Zoom 1p.50
• You are recommended to use a tripod to prevent camera shake
when taking pictures at a high magnification rate.
• The self-timer lamp lights during movie recording to show that
recording is in process.
• The LCD monitor swivel mechanism (1p.23) does not function
during movie recording.
• The zoom bar does not appear on the LCD monitor when zooming
in or out during movie recording.
• When the shutter release button is pressed during movie
recording, the focus is locked.
Power switch
C button
Zoom/w/x lever
#
230100: :
C
#
C
e_kb353.book Page 34 Monday, May 31, 2004 3:05 PM