Filter
Top Products
52
4
Taking Still Pictures
d R b c a C
In self-timer mode, the picture is taken a fixed time after the shutter
release button is pressed.
Use the 10-second self-timer when you want to be included in a group
picture.
Use the 2-second self-timer to avoid camera shake when you press the
shutter release button.
1 Press the m button in Capture mode to display g or
Z on the LCD monitor.
2 Press the shutter release button.
g
The picture is taken approximately ten
seconds after the shutter release button
is pressed. The self-timer lamp lights for
about seven seconds, then blinks for
about three seconds.
Z The self-timer lamp blinks for about two
seconds after the shutter release button
is pressed and the picture is taken.
Using the Self-Timer
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking when taking still pictures.
• If you press the C button, recording movies will start after ten
seconds (or two seconds).
• To cancel the self-timer, press any button, such as the MENU
button, while the second count is displayed.
Taking Pictures of Yourself 1p.48
Troubleshooting: “Subject is not in focus”
1p.137
1
2
g
#
38
38
25
25
:14
14
g
#
38
25:
14
48
48
02
02
00
00
: :480200: :
07/25/2004
07/25/2004
07/25/2004
e_kb353.book Page 52 Monday, May 31, 2004 3:05 PM