Filter
Top Products
2
Getting Started
22
uCaution
• If the lens is removed while the power is on, the shutter
release button is locked. Do not attach or remove the lens
while the power is on.
• When attaching or removing the lens, choose an environment
that is relatively free of dirt and dust.
• Keep the body mount cover attached on the camera when a
lens is not attached.
• Be sure to attach the lens mount cover and lens cap to the
lens after removing it from the camera.
• Do not insert your fingers inside the lens mount of the camera
or touch the CMOS sensor.
• The camera body and lens mount incorporate lens
information contacts. Dirt, dust, or corrosion may damage the
electrical system. Please contact your nearest service center
for professional cleaning.
• We assume no responsibility nor liability for accidents,
damages and malfunctions resulting from the use of lenses
made by other manufacturers.
Use the battery D-LI68 and battery charger D-BC68P
exclusively developed for this camera.
1 Connect the AC plug cord to the battery charger.
2 Plug the AC plug cord into the power outlet.
3 Face the A mark on the
battery up, and insert it
into the battery charger.
The indicator lamp is lit while
charging and turns off when the
battery is fully charged.
Using the Battery and Charger
Charging the Battery
Indicator lamp
AC plug cord
Battery charger