Pentax PENTAX Q-S1 Camcorder User Manual


 
3
Shooting
37
tMemo
The flash modes that can be selected vary depending on the
capture mode.
*1 Fixed to J for some S modes.
The built-in flash is optimum for a subject at a distance from
approx. 0.7 m to 5 m. Vignetting may occur when used at a
distance closer than 0.7 m (this distance varies slightly
depending on the lens being used and the sensitivity setting).
For details on using an external flash, refer to “Functions
when Using an External Flash” (p.76).
Set [Focus Method] to v or w in the control panel or [AF/
MF Settings] of the A1 menu.
tMemo
•In v mode, when the subject is in a dark location, the AF
assist light is used when the shutter release button is pressed
halfway. To change the setting, set [AF Assist Light] in [AF/
MF Settings] of the A1 menu.
You can use the M button to focus on the subject. In that
case, the autofocus by pressing the shutter release button
halfway is disabled. (p.64)
•In v mode, focus ring operations can be disabled to
prevent accidentally moving the lens focus ring and causing
the picture to be out of focus. Set in [10. Focus Ring in AF
Mode] of the E2 menu.
Capture Mode Selectable Flash Mode
R, S
*1
A, J
U A, B, C, D, J
G, J A, B, C, D, E, F, H, J
I A, B, C, D, G, J
L C, D, G, J
Sensitivity
Guide
Number
Sensitivity
Guide
Number
ISO 100 Approx. 4.9 ISO 1600 Approx. 20
ISO 200 Approx. 7 ISO 3200 Approx. 28
ISO 400 Approx. 10 ISO 6400 Approx. 40
ISO 800 Approx. 14 ISO 12800 Approx. 56
Focusing
Focus Method
v/A1