Filter
Top Products
3
Shooting
45
Set the file format for still pictures in the control panel or [Image
Capture Settings] of the A1 menu.
uCaution
• When [File Format] is set to [RAW] or [RAW+], some
functions are not available. [RAW] and [RAW+] cannot be
selected for some capture modes. (p.71)
tMemo
•
When [File Format] is set to [RAW+], a JPEG image and a
RAW image with the same file number are saved at the same
time.
• By assigning [One Push File Format] to M, you can take
pictures with a different file format setting only when the
button is pressed. (p.64)
Set the file format for movies in the control panel or [Movie
Capture Settings] of the C1 menu.
1 Press B in standby mode.
The White Balance setting screen appears.
2 Use CD to select an item.
When k is selected, press B
and use CD to select q, r,
s or t.
Proceed to Step 5 if you do not need to fine-tune the white balance.
Setting a File Format
Still Pictures
v/A1
Aspect Ratio y, x, w, v
File Format JPEG, RAW, RAW+
JPEG Recorded Pixels q, p, o
JPEG Quality m, l, k
Movies
v/C1
Recorded Pixels u, t, s
Framerate 30 fps, 25 fps, 24 fps
Adjusting the Color and
Brightness of Images
White Balance
X
White Balance
Color Temperature
g Auto
Approx. 4,000 to 8,000K
h Daylight Approx. 5,200K
i Shade Approx. 8,000K
j Cloudy Approx. 6,000K
k
q
Fluorescent - Daylight Color
r
Fluorescent - Daylight White
s Fluorescent - Cool White
t Fluorescent - Warm White
Approx. 6,500K
Approx. 5,000K
Approx. 4,200K
Approx. 3,000K
l Tungsten Approx. 2,850K
m Flash Approx. 5,400K
n
Color Temperature Enhancement
–
o Manual 1 to 3 –
Auto White Balance
Auto White Balance
Cancel
Cancel
WB
±
WB
±
OK
OK
OK
MENU