Filter
Top Products
3
Shooting
49
The outcome of Cross Processing for Custom Image and Smart
Effect varies each time a picture is taken. If you take a cross
processed image that you like, you can save the Cross
Processing settings used in the image so that you can load and
use the same settings again.
1 Press B in single image display of playback
mode.
The playback mode palette appears.
2 Use ABCD to select a and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use V to select a cross
processed image.
4 Use AB to select the “Favorite” number 1, 2 or
3 to save the settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
tMemo
• Saved cross processing settings can be loaded by selecting
[Cross Processing] in [Custom Image], and selecting one of
the Favorite settings 1 to 3 for the parameter.
1 Select [Digital Filter] in the control panel, and
press E.
The Digital Filter setting screen appears.
2 UseABCD to select a
filter.
Select [No Filter] to not shoot with
a digital filter.
Proceed to Step 6 if you do not need to change the
parameters.
3 Press J.
The parameter setting screen appears.
4 Use AB to select a
parameter, and use CD to
adjust the value.
Saving the Cross Processing Settings of a
Captured Image
Save as Favorite 1
Save as Favorite 1
Saves this image's Cross
Saves this image's Cross
Processing settings
Processing settings
100-0001
100-0001
Save as Favorite 2
Save as Favorite 2
Save as Favorite 3
Save as Favorite 3
OK
OK
Cancel
Cancel
OK
MENU
Digital Filter
v/A1
Toy Camera
High Contrast
Shading
Tone Expansion
Invert Color
Extract Color
Unicolor Bold
Water Color
Posterization
Slim
Fish-eye
Toy Camera
Toy Camera
Cancel
Cancel
OK
OK
OK
Parameter Adj.
Parameter Adj.
MENU
Shading Level
Shading Level
Cancel
Cancel
OK
OK
OK
MENU