Filter
Top Products
2
Getting Started
25
This camera uses a commercially available SD Memory Card,
SDHC Memory Card, or SDXC Memory Card. An SD Memory
Card with a built-in wireless LAN (Eye-Fi card) can also be
used. (In this manual, these cards are referred to as memory
cards.)
1 Make sure that the camera is turned off.
2 Slide the card cover in the
direction of 1.
3 Insert the card all the way
with the memory card label
facing toward the monitor.
Push the memory card in once to
remove.
4 Close the card cover, and
slide it in the direction of
4.
uCaution
• Do not remove the memory card while the card access lamp
is lit.
• If the card cover is opened while the power is on, the camera
turns off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been used on other devices. (p.27)
• Use a high-speed memory card when recording movies. If the
write speed cannot keep up with the recording speed, the
writing may stop during recording.
Inserting a Memory Card
2
1
4
3