Filter
Top Products
3
Shooting
35
1 Press A in standby mode.
2 Use AB to select an item.
3 Use V to change the value.
4 Press E.
The camera returns to standby mode.
tMemo
• Sets the adjustment steps for ISO sensitivity in [2. Sensitivity
Steps] of the E1 menu.
• Captured images may show more noise if a higher sensitivity
is set. You can reduce image noise by using [High-ISO NR]
of the A2 menu.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
Set in the control panel or [AE Metering] of the A1 menu.
Setting the Exposure
Sensitivity
W
ISO
AUTO
Sets the range to be
adjusted automatically.
The upper limit can be
changed.
ISO
Sets a fixed value
between ISO 100 to
ISO 12800.
Auto
Applies Noise Reduction at optimally calculated
levels throughout ISO range.
Low/
High
Applies Noise Reduction at constant chosen level
throughout ISO range.
Cancel
Cancel
OK
OK
OK
MENU
100
100
3200
3200
100
100
-
-
ISO
ISO
AE Metering
v/A1
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit locations, this mode automatically
adjusts exposure.
In [4. Link AE and AF Point] of the E1 menu,
you can link the exposure and AF point in the
focusing area.
B
Center-
weighted
Meters the brightness with an emphasis on the
center of the sensor.
The sensitivity increases at the center and no
automatic adjustment is performed even in
backlit conditions.
C Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.