Filter
Top Products
4
Playback
57
Connect the camera to a computer using the provided USB
cable I-USB7.
1 Turn the computer on.
2 Turn the camera off.
3 Open the terminal cover of the camera, and
connect the USB cable to the PC/AV terminal.
4 Connect the USB cable to the USB port of the
computer.
5 Turn the camera on.
The camera is recognized as a removable disk.
If the “Q-S1” dialog appears when the camera is turned on,
select [Open folder to view files] and click the OK button.
6 Save the captured images to the computer.
7 Disconnect the camera from the computer.
uCaution
• The camera cannot be operated while it is connected to a
computer. To operate the camera, terminate the USB
connection on the computer, then turn off the camera and
remove the USB cable.
tMemo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.85) for system requirements to
connect the camera to a computer and to use the software.
• The USB connection mode when connecting the camera to a
computer can be set in [USB Connection] of [Interface
Options] in the D2 menu. Normally, you do not need to
change the default setting ([MSC]).
Connecting the Camera to a
Computer