Filter
Top Products
5
Settings
68
You can protect images from being accidentally deleted.
uCaution
• Even protected images are deleted if the inserted memory
card is formatted.
1 Select Y in the playback mode palette.
The screen for selecting the unit for processing appears.
2 Select the unit and press E.
If you selected [All images], proceed to Step 4.
3 Use V to select an image.
4 Select [Protect] and press E.
Repeat Steps 3 and 4 to protect other images.
5 Press F to finish setting.
When images are captured with this camera, a folder is
automatically created and the captured images are stored in it.
Each folder name consists of a sequential number from 100 to
999 and a string of 5 characters. You can change the folder
name in [Folder Name] of the D2 menu.
A folder with a new number is created when the folder name is
changed.
tMemo
• A maximum of 500 images (100 images for Eye-Fi card) can
be stored in a single folder. When the number of captured
images exceeds 500, a new folder is created with the number
following the number of the folder currently being used. In
Exposure Bracketing shooting, images will be stored in the
same folder until shooting is completed.
•
When [Create New Folder] is selected in the
D
2 menu, a folder is
created with the number following the number of the folder
currently being used. Only one folder can be created using this
feature. Multiple empty folders cannot be created consecutively.
File Management Settings
Protecting Images from Deletion (Protect)
Unprotect
Unprotect
Protect
Protect
OK
OK
Exit
Exit
OK
MENU
100-0001
100-0001
Selecting the Folder/File Number Settings
D2
Folder
Date
The two digits of the month and day on which the
picture was taken are assigned after the folder
number. The month and day appear according to the
date format set in [Date Adjustment].
Example) 101_0125: for images taken on January 25th
PENTX
The character string “PENTX” is assigned after the
folder number.
Example) 101PENTX