Filter
Top Products
5
Settings
69
• When [Develop multiple images] or [Develop images in
folder] of [RAW Development] is performed, a “xxxR_JPG”
folder with a new number is created, and the JPEG images
are stored in it. (p.63)
uCaution
• The maximum folder number is 999. After the folder number
reaches 999, you cannot capture new images if you attempt
to change the folder name or create a new folder, or when the
file name number reaches 9999.
Each file name consists of a string of 4
characters and a sequential number
from 0001 to 9999. You can set whether
to continue the sequential numbering
for the file name even if a new folder is
created in [Sequential Numbering] of
[File No.] in the
D
2 menu.
Select [Reset File Number] to reset the file number to its default setting.
tMemo
• When the file number reaches 9999, a new folder is created
and the file number is reset.
•
One of the following string of characters is used as the file name
prefix depending on the [13. Color Space] setting of the
E
3 menu.
You can transfer images to your computer via wireless LAN by
using a memory card with a built-in wireless LAN (Eye-Fi card).
Select the camera action when using
an Eye-Fi card in [Eye-Fi
Communication] of [Eye-Fi] in the D2
menu.
uCaution
• Set up a wireless LAN access point on a computer for the
Eye-Fi card connection.
• For RAW images and movie files, the success of transfer
depends on the specifications and settings of the Eye-Fi card
in use.
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images. The
camera may turn off if the internal temperature of the camera
becomes high.
• For precautions on the Eye-Fi card, refer to “About Eye-Fi
Cards” (p.93).
File No.
T
Continues the sequential numbering for the file name
even if a new folder is created.
S
Returns the file number of the first image saved to a
folder to 0001 each time a new folder is created.
Color Space File Name
sRGB IMGPxxxx.JPG
AdobeRGB _IMGxxxx.JPG
MENU
Reset File NumberReset File Number
File No.File No.
Uses sequential file numberUses sequential file number
in new folder based on lastin new folder based on last
number in previous foldernumber in previous folder
Sequential NumberingSequential Numbering
Transferring Images via Wireless LAN
D2
AUTO
Transfers images automatically when there are any
images that have not yet been transferred.
Only movies with a size of 2 GB or less can be
transferred.
SELECT
Transfers images that are selected in playback mode.
Only JPEG and RAW images can be transferred.
OFF Turns off the wireless LAN function.
Cancel
Cancel
MENU
OK
OK
OK
Communication Info
Communication Info
Eye-Fi Communication
Eye-Fi Communication
Eye-Fi
Eye-Fi
Automatically transfers
Automatically transfers
unsent images from memory card
unsent images from memory card