Filter
Top Products
32
BROWSING PICTURES
If the setup has been completed, you can browse through the pictures on the camera.
The pictures of the camera can be displayed as still pictures or motion pictures.
Displaying multiple pictures of multiple cameras on a screen is also possible.
To display multiple pictures of multiple cameras on a screen, refer to page 36.
Monitoring a Still Picture of a Single Camera
Set as follows to monitor a still picture (JPEG) of a single camera.
Preparations
The setting for still pictures can be made in the "Basic setup" page.
Start up the browser and display the "Basic setup" page of the desired camera.
Refer to page 24 and 25 to display the "Basic setup" page.
Click the "JPEG" radio button for "Operation
mode selection".
Begin the settings for JPEG.
"JPEG mode setup"
Set the following items for JPEG.
"Refresh interval"
Select a refresh interval from the following.
Fast / Middle / Slow / Very Slow
"Image capture size"
Select an image capture size from the following.
VGA (640 x 480) / QVGA (320 x 240) / QQVGA
(160 x 120)
"Quality of image"
Select a quality of the image from the following.
Super Fine / Fine / Normal / Low
Click the [SET] button after completing the set-
tings.
STEP3
STEP2
STEP1