Filter
Top Products
52
TRANSFERRING PICTURES TO THE SERVER
Transferring Pictures to the Server when Motion is Detected
Set for the pictures of the motion detection area to be transferred to the server when motion is detected by the
motion detector function. The settings can be made on the "FTP client" page of "Alarm&Transmission". Refer to
page 49 and 50 to display the "FTP client" page of "Alarm&Transmission".
Set the items for "Alarm transmission setup".
"Alarm transmission"
Check "ON".
You can select "ON" or "OFF" to set whether to
transfer the pictures or not when an alarm
occurs.
"Directory"
Enter the directory where the pictures should be
stored.
"File name"
The file name to be transferred will be [File
name (name of the picture entered by the user)
+ sequential number + month / day / hours /
minutes / seconds / year].
The sequential number will be given automati-
cally starting from 1.
The total number of characters of the directory
name and the file name should not exceed
255.
Click the [SET] button after completing the set-
ting.
STEP2
! Important
STEP1